|
The VideoLink ADVANCED enables you to transmit a video signal from your VCR, Satellite receiver, Cable box, DVD-player, DVD-recorder, Satellite receiver, set top box, PC etc. to a (second) TV without running wires. The transmitter sends an Audio/Video signal from 2 different sources to the receiver via 5.8GHz radio frequency signals. The receiver converts the radio signal back into an A/V signal. The receiver also converts the infrared signals sent by the remote control of the A/V source into radio frequency signals. The transmitter will then reconvert these signals into infrared signals in order to control the connected A/V devices. Using the 5,8GHz frequency, you will normally have no problems with distortion from wireless (WiFi) networks, Cordless phones and microwave for example.
SET CONTENTS.
1 Transmitter
1 RCA cable (white / red / yellow)
1 Receiver
2 SCART adapters (labelled Transmitter).
2 Power Supply adapters
1 SCART adapter (labelled Receiver)
1 IR Extender cable with 3 LEDs.
1 SCART adapter (labelled AV OUT).
1 3,5 mm jackplug / RCA adapter (audio)
1 UHF Coaxial cable
3 Mini-DIN / RCA cables (white / red / yellow).
1 User manual
TECHNICAL DATA
VT58 VIDEOLINK TRANSMITTER
Range: Up to 100m free field, up to 30m through walls and ceilings
Power: 230VAC/50Hz, 7.2VDC adapter
Frequency: A/V: 5.8GHz, 4 channels (A, B, C, D).
IR: 433.92 MHz.
A/V input: 1x Mini-DIN (A/V IN )
1x RCA (A/V IN 1x Video 2x Audio)
A/V output: 1x Mini-DIN (AV OUT)
Video input: 1Vpp (typ) 75 Ohm
Audio input: 1Vpp (typ) 600 Ohm
Audio: Stereo Analog.
Dimensions: 140x100x140mm (with upright antenna)
VR58 VIDEOLINK RECEIVER
Power: 230VAC/50Hz, 7.2VDC adapter
Frequency: A/V: 5.8GHz, 4 channels (A, B, C, D).
A/V output: 1x Mini-DIN (AV OUT)
UHF output PAL-B/G: Channel 36
UHF output PAL-I: Channel 48
Video output: 1Vpp (type) / 75 Ohm
Audio output: 1Vpp (type) / 600 Ohm
Audio: Stereo Analog.
Dimensions: 92x58x20mm (with upright antenna)
|
