|
Suitable for controlling various X10 modules (actuators) through X-10 commands. The TWM4 can also be used behind a (rocker) switch or Momentary switch to start programming macros in, for example, a CM15Pro Computer Interface.
- Turn your switching system into an X-10 transmitter
Suitable for steering various Marmitek modules with ON, OFF, DIM +, DIM-, All Lights On, All Units Off or All Lights Off commands.
- The TWM4 can also be used for starting programmed macros in, for example, a Marmitek CM15Pro Computer Interface.
- Can be set to send either ON or OFF commands (fixed mode) or to alternate between ON and OFF commands (alternate mode).
- As a dimmer interface adjustable for use with single-pole make-contact pulse switches and pulse switches with 2 make-contacts (if necessary with a zero position, multi-switch).
- Adjustable automatic (two-way communication) status request.
Adjustable reception of group commands for status updates in alternate mode.
- Invisible installation built-in behind existing switches or wall sockets. The TWM4 works with all makes and types of switches, which means it can be used in every interior and with all systems.
- Quick and easy to install and program.
FUNCTIONS
- Can send ON, OFF, DIM, BRIGHT, All Lights On, All Units Off or All Lights Off commands (depending on the programming).
- Adjustable for fixed mode or toggle mode sending of ON/OFF commands.
- The dimmer interface is adjustable for use with Momentary switches with one or two, normally open contacts (optionally with zero position, multi-switch).
- Adjustable for automatic request for status information (two-way
communication, status request).
- Adjustable for receipt of group commands for a status update in toggle mode.
TECHNICAL DATA
Rated voltage 230 VAC +/- 10% , 50 Hz
Current consumption < 30 mA capacitive
Signal transmission > 5 Vpp in 5 Ω at 120 kHz
Transmission synchronization 1 pulse burst at 0°/180°
Signal sensitivity 25 mVpp...6 Vpp at 120 kHz ± 4 kHz
Signal/noise ratio 1,35 : 1
X-10 Key codes transmitting ON, OFF, BRIGHT, DIM, All Lights ON, All Lights
OFF, All Units OFF, extended
X-10 Key codes receiving ON, OFF, BRIGHT, DIM, extended, Status
Request
Connection range Up to 2.5 mm2, tightening torque 0.5 Nm
Ambient temperature 0 °C to 35 °C
Relative humidity 30 tot 90% (non condensing)
Dimensions 46x46x16mm
Minimal back box depth: 40mm, advice 50mm
|
